Cover by Roger Dean for the album Us and Them: Symphonic Pink Floyd, 1995. ...
Found on
http://en.wikipedia.org/wiki/Yield_Point
in mechanical engineering, load at which a solid material that is being stretched begins to flow, or change shape permanently, divided by its ...
Found on
http://www.britannica.com/eb/a-z/y/8
The point at which the strain increases without the associated increase in stress. Only a few materials (eg steel) have a yield point and generally only under tensile forces.
Found on
http://www.encyclo.co.uk/local/20539
The first stress in a material, usually less than the maximum attainable stress, at which an increase in strain occurs without an increase in stress. Only certain metals - those that exhibit a localized, heterogeneous type of transition from elastic deformation to plastic deformation - produce a yield point. If there is a decrease in stress after y...
Found on
http://www.encyclo.co.uk/local/20742
The stress necessary to produce an elongation under load of 0.50 per cent of the specimen's original length. Expressed as psi.
Found on
http://www.encyclo.co.uk/local/21038
in drilling-fluid terminology, yield point means yield value (which see). Of the two terms, yield point is more common.
Found on
http://www.encyclo.co.uk/visitor-contributions.php
Stress at which strain increases without accompanying increase in stress. Only a few materials (notably steel) have a yield point, and generally only under tension loading.
Found on
http://www.instron.co.uk/wa/resourcecenter/glossary.xhtml
The first stress in a material less than the maximum obtainable stess at which an increase in strain occurs without an increase in stress. Also known as upper yield stress.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
The first stress in a material, usually less than the maximum attainable stress, at which an increase in strain occurs without an increase in stress. Only certain metals exhibit a yield point. If there is a decrease in stress after yielding, a distinction may be made between upper and lower yield points.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
The load per unit of original cross section at which, in soft steel, a marked increase in deformation occurs without increase in load.
Found on
https://steelforge.com/literature/steelog-the-5000-word-metals-glossary/
The point at which there is a large increase in extension when the elastic limit is increased beyond the stressMetals, particularly mild steel, generally have a very well defined yield stress compared to other materials.
Found on
https://www.encyclo.co.uk/local/20687
The point where material gives way to excessive strain (such as elongation) without any further stress being applied.
Found on
https://www.encyclo.co.uk/local/20784
Stress beyond which a material deforms by a relatively large amount for a small increase in stretching force. Beyond this stress, the material no longer obeys Hooke's law
Found on
https://www.encyclo.co.uk/local/21221
The stress limit at which permanent deformation takes place in a non-brittle material.
Found on
https://www.encyclo.co.uk/local/22327
the point at which a material will continue to elongate at no substantial increase in load during a short test period.
Found on
https://www.usplastic.com/knowledgebase/article.aspx?contentkey=784
No exact match found.
